Door Guard Model DG-13 - 2 pieces  with 3M adhesive which do not damage the car's surface.(Black)

Categories : 12.1) DOOR GUARD


Product Description

Door Guard Model DG-13 - 2 pieces with 3M adhesive which do not damage the car's surface.(ฺBlack)

product code


Size and weight

Product size (width, height) cm 2.2 × 16 × 0.7

Total weight: 300 grams


- Made of PVC Grade A plastic with high flexibility. Can be bent to form with the surface.

- Installed to prevent damage caused by the impact of the car surface. With other things like walls, walls, cars, etc.

- Use 3M adhesive strips. Do not damage the car surface.

- Can be installed on the door edge or car bumper edge or other desired position.

- 1 year warranty by the manufacturer.

How to install

- Clean the area to be installed. Clean, dust and oil free.

- Wipe the surface to be installed dry. Then remove the 3M adhesive tape attached to the rear of the rubber shock.

- The workpiece on the surface to be installed. Without pressing or rolling to the surface. To see the location If not, the orientation is required. Can be peeled off and then repaired.

When you reach the position. Press and iron the work surface smoothly again. Leave it free from water or liquid for 24 hours.


- Do not install if the surface is not clean. Due to dust or moisture, adhesive strips can peel off the surface of the installation.

- Do not pull the tire - often. After installation It will make the adhesive quality deterioration. The tire may fall easily.

Recently Viewed
No recently viewed.
Powered by