LEOMAX Car Door Bumper Model SG-5901 length 16 cm. 4-piece set with 3M adhesive tape
Width 1.5 cm length 16 cm
Weight 350 g
- Made of PVC Grade A plastic with high flexibility. Can be bent to form with the surface.
- Install to prevent damage caused by the impact of the car surface. With other things like walls, walls, cars, etc.
- Use 3M adhesive strips. Do not damage the car surface.
- Can be installed on the door edge or car bumper edge or other desired position.
- 1 year warranty by the manufacturer.
How to install
- Clean the area to be installed. Clean, dust and oil free.
- Wipe the surface to be installed to dry. Then remove the 3M adhesive tape attached to the rear of the rubber shock.
- The workpiece on the surface to be installed. Without pressing or rolling until firmly on the surface. To see the location If you do not have a desired orientation. Can be peeled off and then repaired.
When I reached the position. Press and smooth the workpiece to the surface until firmly. Leave it free from water or liquid for 24 hours.
- Do not install if the surface is not clean. Due to dust or moisture, adhesive strips can peel off the surface of the installation.
- Do not pull the tire - often. After installation It will make the adhesive quality deterioration. The tire may fall easily.